Boot Windows Vista

Posted on by
  1. Boot Camp Windows Vista
  2. Boot Windows Vista To Command Prompt
  3. Boot Order Windows Vista
  4. Windows Vista Boot Disk Usb
  5. Windows Vista Startup Disk
  6. Boot Windows Vista From Usb Flash Drive

This guide explains how to create a Windows bootable USB drive for the following Windows versions: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10.

Windows Vista, 7 and 8 include an option on the install DVD to perform a small number of important repair and recovery functions, but the chances are you didn't get an install DVD with your computer. In this case, you need to create a repair disc in Windows. When that is done you’ll have a formatted USB flash drive ready to be made bootable. Step 2: Make the Drive Bootable Next we’ll use the bootsect utility that comes on the Vista or Windows 7 disk to make the flash drive bootable. In the same command window that you were using in Step 1: Insert your Windows Vista / 7 DVD into your drive.

Creating a bootable USB drive will allow you to install Windows from the USB drive directly.

To be able to install Windows from a USB, you need have one of the following:

Manually Boot from CD on Windows XP, Vista, and 7 Changing the boot order from the BIOS of a computer allows the machine to try and automatically find the device you select and boot from it. While this should work most of the time, on occasion, the computer won't select the drive properly. Instead, you can try manually booting from the CD. Install Windows Vista from Bootable USB Flash Memory Drive. But installing Windows Vista from a high speed USB flash drive perhaps is the easiest & fastest way to complete a Windows Vista install which nowadays every computer or laptop have a USB drive. Meanwhile, This is much faster than using a DVD, gigabit Ethernet. A common use USB flash drives is to use them to boot into Windows. Booting from removable media such as a USB drive allows you to perform diagnostics on a computer that is having trouble booting from the hard drive. This guide will outline making a bootable USB flash drive with Windows XP, Vista, or 7. Computer Does Not Boot to Microsoft Windows Vista Step 1: Verify the Computer Finishes Initial Power-Up (POST). Step 2: Unplug All External Devices. Step 3: Check for Specific Error Messages. Step 4: Run a Computer Diagnostic. Step 5: Boot the Computer into Safe Mode. Step 6: Check for Recent.

  • the ISO image of the Windows version
  • or the original installation disc of the Windows version

Contents

  • 1 Prerequisites
  • 2 Create a Windows XP bootable USB
  • 3 Create a Windows Vista bootable USB
    • 3.1 If you have the ISO image
  • 4 Create a Windows 7 bootable USB
    • 4.1 If you have the ISO image
  • 5 Create a Windows 8 / 8.1 bootable USB
    • 5.1 If you have the ISO image
  • 6 Create a Windows 10 bootable USB
    • 6.1 If you have the ISO image
  • 7 Troubleshooting
  • 8 More Information

Prerequisites

Before you start creating a bootable USB flash drive to install Windows (XP, Vista, 7, 8, 8.1, 10), you need to make sure that:

  • The USB drive is empty and properly formatted
  • The USB drive is bootable
  • Your BIOS/UEFI is properly configured to boot from the USB flash drive first
  • You have the ISO image of Windows XP, Vista, 7, 8 or 8.1. If you have the original Windows installation disc, you can use that instead of the ISO image.
  • Software needed to write the ISO image to the USB drive or alternatives, such as Easy USB Creator 2.0 by NeoSmart or the Windows 7 USB/DVD Download Tool by Microsoft.

USB Drive

The USB drive you want to make bootable should have at least 4 GB in available size.

BIOS/UEFI configuration

To make sure that your BIOS/UEFI is configured to boot from a USB drive, follow our Boot from USB drive guide. You need to make sure that:

If a Boot Device menu doesn’t appear on your screen where the USB drive is plugged-in, check the BIOS/UEFI settings. A Boot Device menu can look like this, depending on your computer model and Windows version:

Boot Camp Windows Vista

If you are using a new computer with UEFI/EFI, make sure that the Boot Legacy option is enabled:

If you’re using a computer with Fast Boot option, make sure that Fast Boot is disabled.

If your BIOS menu doesn’t list a USB item in the BIOS settings, it may mean that it can’t boot from a USB drive. You can try with the USB drive plugged-in and then boot into BIOS directly.

If the item doesn’t appear, you need to use the original Windows installation CD or DVD to install Windows or access the repair tools.

If you need to use the repair tools of an original Windows installation CD/DVD, you can also use Easy Recovery Essentials and run Automated Repair to automatically find and fix boot errors.

ISO image

If you don’t have the ISO image to create the bootable USB drive, you can download an official image from Microsoft’s website.

You need to have the product (or license) key.

Create a Windows XP bootable USB

You can create a bootable USB drive with Windows XP by following these instructions.

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

To burn Windows XP to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Install Easy USB Creator 2.0
  2. Browse the Windows XP ISO Image to load at the ISO File field
  3. Select the destination of your USB Drive at the Destination Drive field
  4. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Erving goffman frame analysis pdf. Erving Goffman (1922–1982) developed a dramaturgical theory of the self and society inspired by Mead’s basic conception of social interaction. In the selection below, excerpted from the book The Presentation of Self in Everyday Life, Goffman presents a theory that likens social interaction to the theater. Individuals can be seen as performers. THE PRESENTATION OF SELF 1 IN EVERYDAY LIFE ERVING GOFFMAN. Social Sciences Research Centre Price: Ten Shillings. THE PRESENTATION OF SELF IN EVERYDAY LIFE ERVING GOFFMAN University of Edinburgh Social Sciences Research Centre $9 George Square, Edinburgh S Monograph No. Goffman, this report would not have been written. Erving Goffman 1959 DOUBLEDAY ANCHOR BOOKS DOUBLEDAY & COMPANY, INC. CARDEN CITY, NEW YORK INTRODUCTION When an individual enters the presence of others, they commonly seek to acquire information about him or to bring into play information about him already possessed. They will be interested in his general.

If you have the installation disc (CD)

If you have the original Microsoft Windows XP Professional installation CD, you can use the CD to create a bootable USB using PE Builder.

It’s important to have the following before you start:

  • The Windows Server 2003 SP1 archive. If not, download from Microsoft now: Microsoft Windows Server 2003 Service Pack 1 (32 bit)
  • The PE Builder software (BartPE). If not, download BartPE
  • The original CD of Windows XP Professional, not a Windows XP Home CD.

    A Windows XP Home CD will not work.

To create the bootable drive with Windows XP, follow these steps:

  1. Boot into the system
  2. Download the PE Builder software from http://www.nu2.nu/pebuilder/
  3. Install the PE Builder to C:. The final path should be C:PEBuilder to make the next steps easier.

Inside the PEBuilder folder, create a new folder named SRSP1. This folder’s path should be C:PEBuilderSRSP1.

  • Download the Windows Server 2003 SP1 archive from http://www.microsoft.com/en-us/download/details.aspx?id=1143…
  • Rename the archive downloaded from Microsoft to MS-WS-SP1.exe
  • Open Command Prompt. You can also open it by typing cmd in the Run dialog box and pressing Enter afterwards.
  • Type the cd command to go to the folder where the MS-WS-SP1.exe file exists:

    Don’t type MS-WS-SP1.exe in the path above. You only need to go to the folder where the file exists.

    Replace c:downloads with the letter of the drive and the directory where the MS-WP-SP1.exe file exists.

  • Type MS-WS-SP1.exe -x to begin the extraction process, press Enter
  • Choose to extract the files to the same folder, e.g. c:downloads:
  • In Command Prompt, you now need to go to the extract folder at the i386 sub-folder.To do so, type the same cd command, if you’re still at the c:downloads folder in Command Prompt and you haven’t created a new folder for the extracted files:

    If you created a new folder for the extract files, say Extract, in c:downloads, update the cd command to go to that folder:

    Then, type cd i386, press Enter

  • Once inside the i386 folder via Command Prompt, type:

    Replace c:PEBuilder with the path where the PE Builder software is installed, if this was changed in previous steps.

  • While still in Command Prompt, expand the ramdisk.sys file with this command:

    Replace c:PEBuilder with the path where the PE Builder software is installed, if this was changed in previous steps.

  • Go to My Computer
  • Go to PEBuilder folder
  • Go to SRSP1 folder
  • Check that you have the 2 files listed there: setupldr.bin and ramdisk.sys

    PEBuilder: Check that you have the files copied

  • Insert the Windows XP Professional CD in the disk tray
  • Launch PE Builder
  • Make the following changes before you click Build:
    • At the Source field, type the letter of the drive for the Windows XP CD, e.g. e:
    • At the Output field, type BartPE
    • Leave the Custom field blank
    • Media output should be None
  • Click Build
  • When the build process is complete, click Close
  • Go to Command Prompt and then go to the PEBuilder folder by typing the cd command:
  • Type this command (make sure the USB flash drive is not removed) and press Enter:

    Replace d: with the letter of the drive where your USB flash drive is loaded.

  • Type YES, when prompted to begin the process. Press Enter after typing YES.
  • Press any key to exit the pe2usb process, after the process is complete
  • Safely remove the USB flash drive from the port
  • Remove the Windows XP CD from the disk try
  • Reboot the system to check if the USB flash drive is now bootable with Windows XP Professional

If your computer doesn’t boot into the USB drive directly, go to Prerequisites > BIOS/UEFI configuration or read the Boot from USB drive guide to configure your BIOS menu to boot from a USB device first.

Create a Windows Vista bootable USB

Depending if you have the ISO image of Windows Vista or the original DVD, you can use Easy USB Creator 2.0 or the diskpart utility to create the bootable USB.

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

To burn Windows Vista to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Install Easy USB Creator 2.0
  2. Browse the Windows Vista ISO Image to load at the ISO File field
  3. Select the destination of your USB Drive at the Destination Drive field
  4. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

To create the bootable drive with the Windows 7 USB/DVD Download Tool, follow the steps from Using the Windows 7 USB/DVD Download Tool from Windows 8/8.1.

While the name is “Windows 7”, you can use the tool for Windows Vista systems too.

If you have the installation disc (DVD)

To create a bootable USB with Windows Vista and install the operating system from that USB drive, follow the steps.

You’ll be using the diskpart utility, available in Windows Vista, to make the USB drive bootable. You’ll copy the files from the installation disc (DVD) to the USB drive after the diskpart utility process is finished.

The instructions are:

  1. Boot your computer
  2. Open Command Prompt and run it as Administrator.You can go at Start > All Programs Accessories > Command Prompt or type cmd in the search field.To run Command Prompt as Administrator, right-click on the Command Prompt item and select Run as Administrator.
  3. When Command Prompt opens, type this command and press Enter:

    Replace c: with the letter of the driver where your Windows Vista is installed: C:, D: etc.

  4. Insert the USB flash drive in the USB port
  5. Type:
  6. Press Enter
  7. Type:
  8. Press Enter
  9. After you press Enter for the list disk command, Command Prompt will list the drives that are connected to your computer. Find the USB drive and its corresponding number.

    Command Prompt: list disk

  10. Then, type this command:

    Where X is the number of the USB flash drive listed by Command Prompt.

    The confirmation message should be:

  11. Press Enter
  12. Type clean and press Enter
  13. Type create partition primary and press Enter
  14. Type select partition 1 and press Enter
  15. Type active and press Enter
  16. Type this command and press Enter afterwards:

    It may take a few minutes to format the entire USB flash drive, depending on its size. However, you can use the quick parameter to format the drive more quickly:

  17. Type assign, press Enter
  18. Type exit, press Enter
  19. Insert the Windows Vista DVD in the optical drive
  20. Go to My Computer
  21. Note the letter of the drive where the Windows Vista DVD is loaded, e.g. D:, E:
  22. Go back to Command Prompt and check if the USB flash drive has been formatted
  23. When the format process is complete, type this command and press Enter:

    Replace D: with the letter of the drive where the Windows Vista DVD is loaded

  24. Then type cd boot and press Enter
  25. Type this command and press Enter:

    Where f: is the letter of the drive where your USB flash drive is loaded

  26. Copy all files from the Windows Vista DVD on the USB flash drive.To open the contents of the DVD (and not load the splash screen of the Windows Vista DVD), right-click on the drive and click Open.

If you followed the above instructions correctly, the USB flash drive should now be bootable with Windows Vista.

You can check this by plugging the USB and rebooting the system. To make sure that your computer boots from a USB drive first, and not from the hard disk, go to BIOS/UEFI configuration.

Create a Windows 7 bootable USB

You can create the bootable USB drive with Windows 7, if:

  • you have the ISO image of Windows 7
  • or you have the original installation DVD of Windows 7

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

To burn Windows 7 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Install Easy USB Creator 2.0
  2. Browse the Windows 7 ISO Image to load at the ISO File field
  3. Select the destination of your USB Drive at the Destination Drive field
  4. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

Before you continue with these instructions, please make sure that:

  • You have the Windows 7 USB/DVD Download Tool downloaded. If not, download Windows 7 USB/DVD Download Tool now.
  • You have the Windows 7 ISO Image ready

The instructions are:

  1. Download Windows 7 USB/DVD Download Tool from http://wudt.codeplex.com/ and launch it
  2. At the Source File field, click Browse and find the Windows 7 ISO image on your computer and load it
  3. Click Next
  4. Select USB Device
  5. Select the USB flash drive from the drop down menu
  6. Click Begin copying
  7. Exit the application, when the process is complete

If you have the installation disc (DVD)

You can use a USB flash drive (see Prerequisites for more information) to install Windows 7 from.

To do so, you need to make the USB flash drive bootable first and then use the original Windows 7 installation disc (DVD) to copy the contents of the DVD to the USB drive.

The diskpart utility, part of Windows 7, will be used.

Follow these steps (similar to Create a Windows Vista bootable USB > If you have an installation disc):

  1. Start the computer
  2. Open Command Prompt as Administrator. Go at Start > All Programs Accessories > right-click on the Command Prompt item and select Run as Administrator.
  3. Enter the password for the Administrator account
  4. At Command Prompt, type:

    Replace c: with the letter of the driver where your Windows 7 is installed: C:, D: etc.

  5. Press Enter
  6. Insert the USB drive that you want to make bootable in an available port
  7. Type diskpart and press Enter
  8. Type list disk and press Enter

    Command Prompt: list disk

  9. Find the USB drive and its corresponding number in the list provided by Command Prompt
  10. Type this command and press Enter:

    Where X is the number of the USB drive listed by Command Prompt above.

    The confirmation message should be:

  11. Type clean, press Enter
  12. Type create partition primary, press Enter
  13. Type select partition 1, press Enter
  14. Type active, press Enter
  15. Type format fs=ntfs and press Enter.

You can use the quick parameter to format the drive more quickly: format fs=ntfs quick

  • Insert the Windows 7 DVD and go to My Computer. Note the letter of the drive where the DVD is loaded, e.g. D:, E:
  • Type assign, press Enter
  • Type exit, press Enter
  • After the format process is complete, type this command in Command Prompt and press Enter:

    Where d: with the letter of the drive where the Windows 7 DVD is loaded.

  • Type cd boot, press Enter
  • Type this command and press Enter:

    Where f: is the letter of the drive where the USB flash drive is loaded

  • Open the contents of the Windows 7 DVD: right-click on the drive and click Open
  • Copy all files from the DVD to the USB

Create a Windows 8 / 8.1 bootable USB

Depending if you have the ISO image of Windows Vista or the original DVD, you can use Easy USB Creator 2.0 to create the USB if you have the ISO image or the diskpart utility to create the bootable USB, if you have the DVD.

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

To burn Windows 8 or 8.1 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Install Easy USB Creator 2.0
  2. Browse the Windows 8 or Windows 8.1 ISO Image to load at the ISO File field
  3. Select the destination of your USB Drive at the Destination Drive field
  4. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

While the name is “Windows 7”, you can use this tool on a Windows 8 or 8.1 system too.

Before you continue with these instructions, please make sure that:

  • You have the Windows 7 USB/DVD Download Tool downloaded. If not, download the Windows 7 USB/DVD Download Tool now.
  • You have the Windows 8 or 8.1 ISO Image ready

The instructions are:

  1. Launch the Windows 7 USB/DVD Download Tool
  2. At the Source File field, click Browse and find the Windows 8 or 8.1 ISO image on your computer
  3. Click Next
  4. Insert the USB flash drive in an available port on your computer. Make sure it’s loaded in My Computer.
  5. At Step 2, select USB Device to write the ISO image to the USB drive. You can click DVD to write the ISO image to a DVD instead.

    Windows 7 USB/DVD Download Tool: Choose Media Type

  6. At Step 3, select the USB flash drive from the drop down menu. If the drive isn’t loaded yet, you can click on the Refresh icon next to the drop down menu.
  7. Click Begin copying
  8. When done, exit the Windows 7 USB/DVD Download Tool

Boot Windows Vista To Command Prompt

If you have the installation disc (DVD)

If you have the original installation disc (DVD) of Microsoft Windows 8 or Windows 8.1 you can create a bootable USB drive.

To do so, follow the steps below:

  1. Boot into Windows 8 or 8.1
  2. Open Command Prompt as Administrator. To do so, press the Windows and C key to search for cmd. From the search results list, right-click on Command Prompt
  3. Click Run as administrator
  4. Enter the password, when prompted
  5. When Command Prompt opens, type this command and press Enter:
  6. Insert the USB flash drive in the port
  7. Type list disk, press Enter

    Command Prompt: list disk

  8. Identify the number next of the USB drive in the list provided by the list disk command
  9. Type select disk X, press Enter. Replace X with the number of the USB drive listed from above steps.

    The confirmation message should be:

  10. Type clean, press Enter
  11. Type create partition primary, press Enter
  12. Type select partition 1, press Enter
  13. Type active, press Enter
  14. Type format fs=ntfs, press Enter. To have the USB drive formatted more quickly, add the quick parameter: format fs=ntfs quick
  15. Type assign, press Enter
  16. Type exit, press Enter
  17. Copy the contents of the Windows 8 DVD or 8.1 DVD to the USB flash drive

Create a Windows 10 bootable USB

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

To burn Windows 10 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Install Easy USB Creator 2.0
  2. Browse the Windows 10 ISO Image to load at the ISO File field
  3. Select the destination of your USB Drive at the Destination Drive field
  4. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

While the name is “Windows 7”, you can use this tool on a Windows 10 system too.

Before you continue with these instructions, please make sure that:

  • You have the Windows 7 USB/DVD Download Tool downloaded. If not, download the Windows 7 USB/DVD Download Tool now.
  • You have the Windows 10 ISO Image ready

The instructions are:

  1. Launch the Windows 7 USB/DVD Download Tool
  2. At the Source File field, click Browse and find the Windows 10 ISO image on your computer

    Windows 7 USB/DVD Download Tool: Source File

  3. Click Next
  4. Insert the USB flash drive in an available port on your computer. Make sure it’s loaded in My Computer.
  5. At Step 2, select USB Device to write the ISO image to the USB drive. You can click DVD to write the ISO image to a DVD instead.

    Windows 7 USB/DVD Download Tool: Choose Media Type

  6. At Step 3, select the USB flash drive from the drop down menu. If the drive isn’t loaded yet, you can click on the Refresh icon next to the drop down menu.
  7. Click Begin copying
  8. When done, exit the Windows 7 USB/DVD Download Tool

If you have the installation disc (DVD)

If you have the original installation disc (DVD) of Microsoft Windows 10 you can create a bootable USB drive.

To do so, follow the steps below:

  1. Boot into Windows 10
  2. Open Command Prompt as Administrator. To do so, press the Windows and C key to search for cmd. From the search results list, right-click on Command Prompt
  3. Click Run as administrator
  4. Enter the password, when prompted
  5. When Command Prompt opens, type this command and press Enter:
  6. Insert the USB flash drive in the port
  7. Type list disk, press Enter

    Command Prompt: list disk

  8. Identify the number next of the USB drive in the list provided by the list disk command
  9. Type select disk X, press Enter. Replace X with the number of the USB drive listed from above steps.

    The confirmation message should be:

  10. Type clean, press Enter
  11. Type create partition primary, press Enter
  12. Type select partition 1, press Enter
  13. Type active, press Enter
  14. Type format fs=ntfs, press Enter. To have the USB drive formatted more quickly, add the quick parameter: format fs=ntfs quick
  15. Type assign, press Enter
  16. Type exit, press Enter
  17. Copy the contents of the Windows 10 DVD to the USB flash drive

Troubleshooting

Setup cannot find the End User Licensing Agreement (EULA)

You may receive this error when trying to write a Windows (XP, Vista, 7, 8, 8.1) ISO Image to a USB drive and make it bootable:

If so, the ISO image might be corrupted. In this case, you can try:

  • download a new ISO image from Microsoft
  • use the original installation disc instead to create the bootable drive (instructions for using the disc instead of the ISO image are available in this guide for all Windows versions)
  • use Easy Recovery Essentials if you’re looking for accessing repair tools. Run EasyRE’s Automated Repair feature to automatically scan and fix various boot errors. Other features are available.

Download Windows 7 USB/DVD Download Tool

To download the Windows 7 USB/DVD Download Tool, go to http://wudt.codeplex.com/.

Bootable USB will not boot

To make sure that the USB drive will boot when starting your computer, make sure that:

  • Your BIOS configuration allows USB drives to boot first and then boot from hard disk. Follow the steps from BIOS/UEFI configuration or the our Boot from USB drive guide.

If you created the bootable USB drive using the Windows 7 USB/DVD Download Tool, new computers with UEFI might not boot from the USB as it’s been formatted using NTFS and not FAT32.

To get around this, follow these steps:

  1. After the Windows 7 USB/DVD Download Tool successfully created the bootable USB drive, go to My Computer and copy all contents from the USB drive to a folder on your Desktop

    Windows 7 USB/DVD Download Tool: Done

  2. Right-click on the USB Drive in My Computer and format it as FAT32
  3. After the format process is complete, copy all files from the folder you created on your Desktop back to the USB drive

More Information

Support Links

  • Easy Recovery Essentials for Windows – our repair and recovery disk.
    It’s an easy-to-use and automated diagnostics disk. It’s available for Windows 8, Windows 7 and Windows Vista. It’s also available for Windows XP and Windows Server.

    Read more at Windows Recovery Disks.

  • The NeoSmart Support Forums, member-to-member technical support and troubleshooting.
  • Get a discounted price on replacement setup and installation discs: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10.

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

  • Windows XP (all editions)
  • Windows Vista (all editions)
  • Windows 7 (all editions)
  • Windows 8 (all editions)
  • Windows 8.1 (all editions)
  • Windows 10 (all editions)
  • Windows Server 2003 (all editions)
  • Windows Server 2008 (all editions)
  • Windows Server 2012 (all editions)
Active1 year, 6 months ago

I have just repaired a friends computer (replaced motherboard) and now I am tryingto repair the Windows (Windows Vista) partitions.

Unfortunately, probably due to the fact that he tried to start it several timesafter the old motherboard had stopped working (no signal on video) now the partitiontable or the file systems (or both?) appear to be damaged.

Boot Order Windows Vista

I managed to boot Windows a couple of times but could not complete the boot. I triedto repair the partition table and file systems using Linux RIP (booting from USB stick)but the Linux utilities say that the file system is damaged and I should runchkdsk /f from Windows.

So I now need a Windows boot CD from which I can boot and run chkdsk or any otherWindows utilities that can repair the file system.

Is there an easy way to create such a CD? Or can I download it for free somewhere?All the links to Windows Vista boot / repair CD's I have found on the internet refer to non-free stuff. Any hint?

EDIT

I have a working laptop with Windows Vista installed. So one solution would be to makea bootable CD or USB from it so that I can boot the desktop and run the repair utilities.However, I do not have the Windows Vista installation DVD, because both computers werebought with Windows pre-installed.

Giorgio
GiorgioGiorgio
1221 gold badge3 silver badges16 bronze badges

migrated from serverfault.comJun 29 '12 at 17:45

This question came from our site for system and network administrators.

3 Answers

If you need a repair disk, and not an installation disk, you are still in luck.

From your running system, open the Start Menu, and search for 'Backup and Restore'. In the Control Panel applet that appears, one option on the left or bottom of the screen is to create a Recovery Disk. This disk that it makes will boot the recovery tools for Vista or Windows 7 that you can use on any other Vista or Windows 7 system (depends on which version you create though). You can then boot the CD and access the same Recovery tools as the standard Windows disk would allow you to use.

Canadian LukeCanadian Luke
18.5k33 gold badges97 silver badges153 bronze badges

I remember fixing my MBR with a Windows XP CD which lets you boot with Command Prompt.

Problems with the master boot record (MBR) of a system may prevent the system from booting. The MBR may be affected by malicious code, become corrupted by disk errors, or be overwritten by other boot loaders when experimenting with multiple operating systems on a host. This recipe describes one method of repairing the MBR for an XP host using the recovery console.

Boot with the XP installation CD.

When prompted, press R to repair a Windows XP installation.

Windows Vista Boot Disk Usb

If repairing a host with multiple operating systems, select the appropriate one (XP) from the menu. If you have only one operating system, enter 1 to select it.

Enter the administrator password if prompted.

To fix the MBR, use the following command:

fixmbr

This assumes that your installation is on the C: drive. You will be presented with several scary warning lines the reading of which will make you want to say no. Microsoft is exceptionally vague regarding the conditions under which fixmbr can cause problems although they are clear about the consequences (losing all data on the hard drive), so use this at your own risk.

Type y and ENTER to fix the MBR.

Type exit to leave the recovery console and reboot.

Source: Fix MBR Record Using WinXP

RhyukRhyuk

You can use the Falcon Four Boot CD to restore a Vista MBR so you can boot Vista again:

Choose 'MS DaRT 6.5' from the main Boot screen, and then hit cancel after a screen or two, and it'll give you a list of tools, one being Boot Commander, which is the tool from Microsoft for restoring the boot record for Vista.

Brad Parks

Windows Vista Startup Disk

Brad Parks
1,5552 gold badges14 silver badges25 bronze badges

Boot Windows Vista From Usb Flash Drive

Not the answer you're looking for? Browse other questions tagged windows or ask your own question.